Metal C U-Shaped Profile Channel Roll Forming Machine

When a machine is running at 50m/min and bending metal thickness up to 5mm, the physical forces involved are staggering. A machine that is not built for this level of stress will vibrate, lose its alignment, and eventually suffer structural failure. Our Metal C U-Shaped Profile Channel Roll Forming Machine is over-engineered to ensure it thrives under these conditions.

The Strength of the Main Frame

While cheaper competitors use bolted C-channels for their machine bases, we utilize heavy-wall, square-tube welded frames that are thermally treated to remove internal stress. This provides a “dead” foundation that absorbs vibration, ensuring that the Steel Omega Purlin Roll Forming Machine remains perfectly quiet even when processing heavy-gauge steel at high speeds.

Advanced Hydraulics for Punching and Cutting

Punching a hole through 5mm structural steel requires immense force. To do this “on the fly” at 50m/min requires a high-flow hydraulic system. We use world-class hydraulic components and oversized accumulators to provide the “punch” needed without causing pressure drops in the rest of the C channel and U channel production line system. The hydraulic cutting unit is equipped with a high-strength blade (typically Cr12MoV) that can perform thousands of cuts before needing a sharpen, ensuring your production never stops.

Protecting the Material

Even with 5mm thickness, surface finish matters, especially for galvanized or pre-painted steel. Our rollers are polished to a mirror finish and chrome-plated to ensure they don’t mark or scratch the material. The auto stacker uses non-marring surfaces to bundle the purlins, ensuring they arrive at the construction site in pristine condition, ready for the elements.

Contact: Elise
Tel:+86-155 3281 7581
Email: elise@tgrfm.cn